Kromschröder VCS 9 120 V AC  Solenoid valves for gas

Kromschröder VCS 9 120 V AC Solenoid valves for gas

You can get an offer for the Kromschröder VCS 9 120 V AC Solenoid valves for gas product of the brand Kromschröder right now!


Kromschröder VCS 9 120 V AC Solenoid valves for gas Details

  • Product Name: Kromschröder VCS 9 120 V AC Solenoid valves for gas
  • Brand: Kromschröder
  • Keywords: Kromschröder VCS 9 120 V AC Solenoid valves for gas, Kromschröder

If you have any questions, please mail to

Ambient conditions Icing, condensation and dew in and on the unit are not permitted. Avoid direct sunlight or radiation from red-hot surfaces on the unit. Note the maximum medium and ambient temperatures! Avoid corrosive influences, e.g. salty ambient air or SO2. The unit may only be stored/installed in enclosed rooms/buildings. The unit is suitable for a maximum installation height of 2000 m AMSL. Ambient temperature: -20 to +60°C (-4 to +140°F), no condensation permitted. Long-term use in the upper ambient temperature range accelerates the ageing of the elastomer materials and reduces the service life (please contact manufacturer). Storage temperature: -20 to +40°C (-4 to +104°F). Enclosure: IP 65. This unit is not suitable for cleaning with a high-pressure cleaner and/or cleaning products. Mechanical data Gas types: natural gas, LPG (gaseous), biogas (max. 0.1 %-by-vol. H2S) or clean air; other types of gas on request. The gas must be clean and dry in all temperature conditions and must not contain condensate. Medium temperature = ambient temperature. CE and FM approved, UL listed, max. inlet pressure pu: 500 mbar (7.25 psig). FM approved, non operational pressure: 700 mbar (10 psig). ANSI/CSA approved: 350 mbar (5 psig). Flow adjustment limits the maximum flow rate to between approx. 20 and 100%. Adjustment of the start gas rate: 0 to approx. 70%. Opening times: VAS../N quick opening: ≤ 1 s; VAS../L slow opening: up to 10 s. Closing time: VAS../N, VAS../L quick closing: < 1 s. Switching frequency: VAS../N: max. 30 x per minute. VAS../L: there must be a period of 20 seconds between switching off and on again so that the damping is fully effective. Safety valve: Class A, Group 2 pursuant to EN 13611 and EN 161, Factory Mutual (FM) Research Class: 7400 and 7411, ANSI Z21.21 and CSA 6.5. Valve housing: aluminium, valve seal: NBR. Connection flanges: Up to size 3: Rp to ISO 7-1, NPT to ANSI/ASME; size 2 and higher: with PN 16 ISO flange (pursuant to ISO 7005), with ANSI flange pursuant to ANSI 150. Cable gland: M20 x 1.5. Electrical connection: cable with max. 2.5 mm2 (AWG 12) or plug with socket to EN 175301-803. Duty cycle: 100%. Power factor of the solenoid coil: cos φ = 0.9. Electrical data for VAS 6–9/VCS 6–9 Mains voltage for VAS 6–8/VCS 6–8: 120 V AC, +10/-15%, 50/60 Hz, 230 V AC, +10/-15%, 50/60 Hz, 24 V DC, ±20%. Mains voltage for VAS 9/VCS 9: 120–230 V AC, +10/-15%, 50/60 Hz. Switching frequency: max. 1 x per minute. Max. temperature of solenoid coil: +20°C (+68°F) above ambient temperature. Current consumption at 20°C (68°F): Pick-up current: 1.8 A, holding current: 0.3 A. 

About the Kromschröder

You can contact us for all products of the brand Kromschröder. We will send you a special offer as soon as possible!


Other Products Kromschröder

Looking an Industrial Part for your Company?

Contact us today for quote or more information.

Get In Touch